Full Container Inspectors-inspections-Leak Detector

Full Container Inspection
|
|
|
|
Inspections
|
|
|
|

 

Pressure/Leak Detector for PET              see FS-80 for cans and wide mouth bottle

This will revolutionize the way you inspect bottles for low pressure caused by misplaced caps, stress cracks, pinholes  and other defects in PET and HDPE containers - whether they hold carbonated beverages, LN2 dosed water, teas or juices. The filtec Pressure/Leak Detector uses a beltless system. There’s no squeezing of the bottles to detect improper pressure. This eliminates the possibility of  product spillage from defective bottles and the resulting contamination of the belts.


The Pressure/Leak Detector is virtually maintenance-free. Instead of checking the bottle with belts that frequently need to be adjusted, each bottle is firmly supported by precisely positioned guide rails while being inspected by an  intelligent sensor utilizing a proprietary algorithm. This enables the Pressure/Leak Detector to give an immediate and reliable read. When the pressure is outside the acceptable limits, a defect is indicated, and the bottle is rejected from the line.

Multiple rejection and sorting options are available to support filtec pressure/leak detection solutions.

 

 

 

 


This technological breakthrough operates with virtually any filtec machine including the Pressure/Leak Detector.
With it you can:

  • Monitor your rejects by type.
  • Detect problems with equipment before they become expensive issues.
  • Network your filtec machines together and to plant networks.
  • Easily adjust the settings of the machinery.
  • Access important data with the press of a button.
  • Collect data and statistics for data acquisition systems through a variety of industry-standard protocols.
  • Set the system up for multiple users  and different levels of access.

 

View/Download the Technical Sheet